What is the optimal Formwork Panel?

Nowadays there are different kinds of formwork panels used in the concrete shuttering working. But the optimal formwork panel should be the film faced plywood.

As the development of the construction industry, the demand of the building materials especially the formwork panel like film faced plywood have been increasing. China, the biggest exporting country of plywood, its film faced plywood has been accepted well by more and more users from all over the world.

In north of China, especially the area of concentrated area of the wooden panels, the goverment increase the intensity of enviromental protection. All the factories that produced the wooden panel including the film faced plywood, marine plywood, theother formwork plywood like LVL etc. are required to use the natural gas to burning the boiler to instead of the coal.

That means the cost of the film faced plywood will be climbing higher because the pricey of the natural gas.

So more and more small family mill are facing the closing because they are loosing the superiority of the price.

So if the buyers who are in the process of purchasingthe film faced plywood to use in the concrete formwork panel, they are strongly suggested to buy in the recent period because the market of stock film faced plywood are on sales. The price will only keep the same level for less than two months. Later the price have to be added 27 to 36 because of the cost problem of the natural gas.

  

More information please contact me: Beizhu05@beizhugroup.com

Whatsapp: 0086 13453145207.

Do you still use the PVC Formwork Panels?

With the economic development, rapid population growth, the global construction industry is growing faster and faster, the choice of building materials is particularly important. In the past, the common building formworks panel is PVC material, with the technology and production process improvement, the new plastic formworks panel came into being. For the world's builders, are you still using pvc building formworks panel?

Let us look at the following comparison results, I believe you will have a choice to change.

1.PVC formworks panel surface is smooth, the appearance is very beautiful. However, after several times use, the ordinary can only use for  4-5 times, 7 times for a good quality pvc plate, then its surface will become very rough and you have to use the release agent.

2.Pvc formworks panel is very heavy, the same size 1220 * 2440 * 18mm is 32kg, our plastic formwork panel is only 25kg. This is also what the customers value, for it is suitable for high-altitude operations and workers operation.

3.Pvc formworks panel is brittle, will easily broken when falling from the high-altitude. When the workers split the mold pry easily broken. And at the site, there will be a lot of debris on the ground, workers dismantling the formworks panel, usually throw down, so pvc formworks panel will easily break. While our pp board is intact.

4.Pvc formworks panel, 1cm from the edge can not nail, is easy to break. Our pp formworks panel only need to keep a distance of 2mm to nail.

5.Pvc formworks panel has layer of wood chips in the middle, or wheat straw, not waterproof. At the same time contains a blowing agent, the density is small, easy to absorb water.

6.Pvc easy to weathering.

7.PP formworks panel can be recycled, environmentally friendly.

8. Before we produced also pvc formworks panel, but the engineers and customers' feedback is not good. this time can be a few generations of formworks panels to show the history of the customer.

More information please contact me:Beizhu05@beizhugroup.com
Whatsapp: 0086 13453145207